Applicable Sensors

Strain gages, Strain-gage transducers

Input Channels

4

Synchronous Measurement

Up to 4 units by 16 channels

Applicable Gage Resistance

Quarter bridge system (2-wire or 3-wire): 120 Ω
Half and full bridge systems: 120 Ω to 1000 Ω

Input Connectors

37-pin D-sub connector

Bridge Power Supply

AC 2 V rms

Gage Factor

2.00 fixed

Balance Adjustment

Resistance: Within ±2% (±10000 μm/m) 
Capacity: Within 5000 pF

Balance Adjustment Methods

Resistance: Pure electronic auto balance method 
Capacity: CST method (Automatic tracking)

Nonlinearity

Within ±0.1%FS

Measurement Range

200, 500, 1000, 2000, 5000, 10000, 20000 μm/m, 7 steps. 
Accuracy: within ±0.5%FS

Frequency Response

DC to 200 Hz
Deviation: within ±10%

Sampling

Sampling Frequencies : Max. 10 kHz (Synchronous sampling of 4 units 16 channels)

LPF

Transfer Characteristics : 2nd order Butterworth
Cutoff Frequency : 10, 30, 100 Hz, and FLAT -4 steps
Amplitude Ratio at Cutoff Point : -3±1 dB
Attenuation : -12±1 dB/oct.

A/D Resolution

24 bits

Holding Setting Conditions

0.7 A or less (13 VDC)

TEDS

Loading function from the TEDS sensor (Applicable input adaptors UI-10A and UI-11A) 
CH name writing function (For the manufacture ID: KYOWA only)

Interfaces

USB2.0 (Compliant to the High-Speed, USB3.0 port supported)

Stability

Temperature
Zero point: within ±0.2 μm/m per ºC
Sensitivity: within ±0.05%/ºC
Time
Zero point: within ±1 μm/m/8h. 
Sensitivity: within ±0.3%/8h.

Withstand Voltage

Operating Temperature/Humidity

0 to 40ºC, 20 to 85%RH (Noncondensing)

Vibration Resistant

±29.42 m/s2 (3 G), 5 to 200 Hz, (12 cycles for each axis, 10 minutes/cycle)

Power Supply

DC 11 to 16 V
Connector: RM12BRD-4PH (Hirose)

Current Consumption

0.7 A or less (12 VDC)

Dimensions

210 W x 35 H x 157.5 D mm (Excluding protrusions)

Weight

Approx. 700 g